What car stereo amp would fit me best? - boss car stereo
I have recently bought 350 watt speakers head to the front of my car, and 800 watts for the rear. A sales associate at Circuit City employees told me that I have an amp need to give them the power, but he is also unable to tell me what Art What size amp that works best for me?
Thursday, December 31, 2009
Boss Car Stereo What Car Stereo Amp Would Fit Me Best?
Subscribe to:
Post Comments (Atom)
3 comments:
I think back to front at 350 watts RMS and 800 watts RMS. I had the head of the speaker, can not and must not be dominated by one watt, or not, as the quality. It is taking too much for the mainframe, because most are less than 25W x 4 channels. I suggest getting a 2-channel amplifier, and connect the speakers in order (from front to back) and the same with the left side. This will give you 575W RMS per channel you need. Get the audio amplifier Boss D600.2. It offers 600 watts per channel into 2 Ohm loads. Then turn the gain reduction, so that no overheating, and you have a car that seems decent. Good luck
They have an amplifier, the RMS values corresponding to less efficient speakers, find the four channels.
The scores that the peak or maximum there. Use the numbers in the trash. They are useless. If you give the speaker really is kind of strength that would blow the proud owner of 4 speakers.
My best estimate for the best performance of the speakers would be 25 to 50 watts RMS.
They have an amplifier, the RMS values corresponding to less efficient speakers, find the four channels.
The scores that the peak or maximum there. Use the numbers in the trash. They are useless. If you give the speaker really is kind of strength that would blow the proud owner of 4 speakers.
My best estimate for the best performance of the speakers would be 25 to 50 watts RMS.
Post a Comment